Tile Leveling System Spacer Clips

Our tile levelers are tools for floor and wall setting, it keeps the tile balance on the same horizontal position and prevents tiles from moving while curing.

The leveling system set secure the tile position and prevent movement, use on 1/16" (1.5mm)up to 1/2"(12mm) thick tiles , extremely easy to instal and remove. Can be used for laying floor or wall tiles.

Product Description

High-quality tile leveling system: Tile clips can prevent the tiles from moving during the mortar curing process, and tile spacers can align the tiles horizontally and smoothly before the cement sets.

Convenient installation and disassembly: Tile leveler spacers does not require other assembly tools, tile spacers leveling system can be used for floors/walls/stones. Tile spacers and levelers can save money and time for tile installation.

Beautiful and efficient: 1/8" tile leveling system can improve the laying efficiency of non-slip bricks/stone/thick bricks/to obtain a perfect non-slip surface finish.

How to use Tile Leveling System Kit ?

1.Put the clip into the tile bottom.

2.Slide clips under the tile and into the mortar,then place the second tile.

3.Insert the wedge and push it with the pliers.

4.One tile set up with 4 clips and wedges.

5.Kick them out or use rubber mallet out after 24 hours.

6.The clips are disposable and the wedges can be reused.

After the construction, please clean up the cement next to the clips inside the brick joints, if the cement covers the clips, then when the cement dries out, the clips will not be easy to break from the bottom, if it breaks from the middle part, there will be part of the clips left in the brick joints, and it is difficult to clean, please be careful when using.