This professional quality tile leveling set increases the efficiency of laying tiles. The tile leveling system ensures flatness between tiles avoiding inequalities. 

FEATURE:

1.Ensure the tile balance on the same horizontal position.

2.Prevent tiles from moving while curing.

3.Reduce the time for grinding and polishing.

4.Improve tile installation speed and reduce installer fatigue/stress.

5.Steel needles can be replaced ,which extend the service life of tile leveling system kit and economical for you.

How to Use Tile Leveling System Kit ?

1. Tile gap should be kept between 1/12"(2mm) -1/4"(6mm) when tiles are laid

2. Insert the T-needle along the tile gap.

3. Rotate 90 degrees clockwise to make the t-shaped steel pin stuck between the two tiles.

4. Rotate the adjustment cover with a wrench until the two tiles are at the same level.

5. Rotate the T-needle 90 degrees to remove before the cement is completely dry (usually no more than 6 hours).

6. Clean and dry storage for reuse.

Note: Moving the T-shaped needle back and forth before tightening up is highly suggested so that the tile leveling system can be more easily taken out.